EMEAI - English
Facade Access Solutions supports building owners, developers and contractors across the Grand Duchy of Luxembourg. Our Luxembourg teams design, supply, install and maintain permanent facade access solutions for high-rise towers and complex facades across Luxembourg. We stay with each project from the preliminary design stage to long-term service.
Buildings in Luxembourg face a rare mix of pressures. Winters bring freeze-thaw cycles and lows near -12°C, while summers now push above 40°C. Humidity sits above 85 percent for much of the winter. Heritage rules in Luxembourg City also restrict what can be visible on protected facades. All of this shapes how permanent building maintenance units must be specified.
Our permanent building maintenance units (BMUs) are engineered for these conditions, keeping Luxembourg’s skyline safe and accessible year-round. We are part of Alimak Group, a global leader in facade access. More than 1,000 employees and 39 global locations stand behind every Luxembourg project. Over 16,000 units installed worldwide back our track record.
Our Luxembourg product range covers permanent access and height safety systems for buildings of every height.
Building Maintenance Units travel along the roof to give safe, repeatable access across large facades. Each BMU is engineered to the building geometry and roof load. In Kirchberg, where glass curtain walls, cantilevered floor plates and stepped setbacks are common, our BMUs reach every corner of the envelope.
Our davit systems suit smaller roofs and intermittent access needs. They transfer working loads safely into the building structure. Powered and portable davits remain the most practical permanent access option for mid-rise offices, ministries, and hotel properties across Luxembourg City.
A monorail carries a cradle along a fixed track for atria, soffits and recessed facades. Railscaf adds a flexible, track-based option for more complex geometries.
Tiebacks and lifelines provide rope-access and fall-protection anchors for facade work. They support safe access where a full machine is not required. Our anchor systems meet the requirements of EN 795 and EN 1808, with configurations available for heritage buildings where fixings must sit below the roofline to protect the facade’s appearance.
Our powered platforms run on permanent guide rails for steady vertical travel. They give reliable access on tall, repetitive elevations.
We support a building across its full life. Our Luxembourg solutions cover new towers, design-stage planning and upgrades to existing systems.
For new construction, we design and install facade access systems that fit the architecture from day one. Luxembourg projects often need Eurocode-based structural input, snow-load review, and wind analysis built into the BMU calculations.
Our integrated design services bring access planning into the early design phase. This keeps systems compliant and hidden within the building line. On EU institution buildings and signature Luxembourg towers, early integration addresses parapet heights, roof crane runways and rooftop mechanical interference before they reach the site.
Our retrofit services add to or upgrade access systems on existing Luxembourg buildings without disrupting tenants. Beyond facades, we also deliver infrastructure access solutions for bridges, tunnels and nuclear facilities.
Our Luxembourg services keep access systems safe, compliant and ready to use. We service our own equipment and systems from other manufacturers.
Our service solutions cover planned maintenance and call-outs to keep systems running. Service coverage extends across Luxembourg City, Esch-sur-Alzette and the wider Grand Duchy, with cross-border support from our European teams.
Our inspection, safety and compliance service checks systems against Luxembourg workplace safety law and European standards. This includes EN 1808 for suspended access equipment and the Grand-Ducal Regulation of 4 November 1994 on minimum safety and health requirements for work equipment, both enforced by the Inspection du travail et des mines (ITM). The full set of applicable codes, regulations and standards is available on our central reference page.
Our refurbishment solutions extend the lifespan of aging BMUs and platforms by replacing components and controls. This is a practical route for original 1970s and 1980s Kirchberg towers that need to meet current ITM expectations without a full system replacement.
Genuine OEM spare parts keep older systems reliable and compliant. We hold parts inventory across Europe to shorten lead times for clients in Luxembourg.
Our asset management service tracks inspection records and service history in one place. This supports the documented evidence of periodic checks that ITM inspectors expect during workplace safety reviews.
Our training prepares operators and competent persons to use systems safely. Courses align with EN 1808 and Luxembourg workplace safety law, with multilingual delivery available in French, German and English to suit local site teams.
Facade Access Solutions in Luxembourg brings together a team driven to solve the challenges of access, safety and cost efficiency for the Grand Duchy’s unique building stock. We carry more than 120 years of combined experience, with 16,000+ machines installed worldwide and 300+ new projects delivered every year. That scale is matched by closeness, because our footprint lets us hold global expertise in engineering and manufacturing while keeping people near you for project management and service across Luxembourg and the Greater Region.
The combination of Tractel, Manntech and CoxGomyl means we can pick the best system for almost any building, rather than forcing a single product to fit. Luxembourg clients reach all three brands and the full product portfolio through a single team, backed by the strength of Alimak Group.
Tell us about your building and your access needs. Our Luxembourg team will help you plan, install or service the right system.
Permanent facade access equipment in Luxembourg follows EN 1808:2015 for suspended access equipment, which sets out annual thorough examinations by a competent person, six-monthly checks and daily pre-use inspections by the operator. The Grand-Ducal Regulation of 4 November 1994 on the minimum safety and health requirements for the use of work equipment adds general obligations for employers. The Inspection du travail et des mines (ITM) enforces these rules on sites in Luxembourg. Building owners of protected properties in Luxembourg City should also confirm access for inspections with the communal administration before scheduling work.
Key references include EN 1808:2015 for suspended access equipment, EN 795 for personal fall protection anchor devices and the Eurocode series for structural design. Luxembourg workplace safety law adds the Law of 17 June 1994 concerning the safety and health of workers at the workplace and the Grand-Ducal Regulation of 4 November 1994 on minimum safety and health requirements for work equipment. Heritage buildings in Luxembourg City are subject to national protection rules administered by the Service des sites et monuments nationaux (SSMN), which may restrict visible fixings on protected facades.
Yes. Our Luxembourg service teams maintain and inspect systems from many brands. Genuine spare parts and refurbishment keep older units safe and compliant.
Yes. We bring access planning into the design stage so that systems stay compliant and well-integrated. For Luxembourg projects, that includes wind loading on the exposed Kirchberg plateau, snow loads across the Ardennes and Oesling region and heritage-line concealment for buildings in the historic city core from the first drawing.
Our equipment handles the continental climate typical of the Grand Duchy, from winter lows near -12°C to summer highs above 40°C. We specify sealed control systems and protective coatings for repeated freeze-thaw cycles, corrosion-resistant materials for high humidity months and UV-rated finishes for stronger summer sun. Local service teams also adjust maintenance intervals to suit each building’s exposure profile and environmental conditions.